Answer
Resetting the Maintenance Required Indicator on a Honda Accord from 1998 to 2002.
Change the location of the key to the II position.
Turn the ignition key to the off position and press and hold the odometer reset button for a few seconds.
While still holding the button, turn the key back to the II position to complete the operation.
The light should turn off after around 10-15 seconds. Wow, I can’t believe I really had to write anything like that:fawk:
A common question is how to turn off the maintenance needed light on a 1998 Honda Accord, which is answered as follows:
It’s a courtesy reminder for routine maintenance. Turn the key off, press and hold the’reset’ button in the gauge area on the right, then turn the key back on (only to the ‘run’ position, not the start position). Continue to hold down the button for at least 10 seconds, and the light should turn off (reset).
In addition, what does the “Maintenance Required” light on a 1998 Honda Accord indicate?
If you drive a Honda Accord from 1998 to 2002, it seems that you are referring to the “Maintenance Required” light. That light is programmed to turn off after a specified amount of miles have been covered by your vehicle (I believe it is around every 7,500 miles). When this light illuminates, it indicates that there is nothing wrong with your vehicle.
Second, what is the procedure for resetting the Honda Accord’s maintenance needed light
A light will activate when the Engine Oil Life is 5 percent or less, indicating that it is time to service the engine.
Start by pressing the “RUN” button on the ignition.
Continue to press the “SELECT/RESET” stem until the Engine Oil Life indicator appears on the screen.
Press and hold the old “SELECT/RESET” button for 10 seconds before releasing the stem.
Hold down the “SELECT/RESET” button for another 5 seconds.
When driving a 2000 Honda Accord, how do you reset the maintenance necessary light?
Reset the Maintenance Required Light on a 2000 Honda Accord.
Remove your keys from the ignition.
In the instrument panel, press and hold the SELECT/RESET button for a few seconds. then flip the ignition switch to the ON position (ii).
Hold the button down for at least 10 seconds, or until the indicator returns to its default setting.
Start the engine after turning off the ignition to ensure that the indication has been reset properly.
What is the procedure for turning off the Honda’s maintenance needed light?
The following might be more appropriate directions: Start with the engine turned off. To use this key, press it in but do not turn it (LOCK (0) position). Press and hold the trip button for a few seconds. While still holding the button, turn the key to the (ON (II) position. ) Continue to keep the button down until the indicator turns back on (about 10 seconds).
What does it signify when the Honda Accord’s maintenance needed light flashes on the dash of the vehicle?
It’s essentially simply informing you that your vehicle will need some kind of planned maintenance in the near future. It might be that you need an oil change, a tune-up, or even a new timing belt installed. When the light starts to blink at the start of the vehicle, you have around 500 miles or so before the next planned service.
A 2001 Honda Accord’s maintenance light may be reset by following these steps.
How do I reset the 2001 Honda Accord’s maintenance light? (With the key in the accessory position and the engine off, press and hold the reset button next to the odometer for 10 seconds until the maintenance light blinks, then start the vehicle. There will be no more light.
A 2006 Honda Accord’s maintenance needed light may be turned off by following these steps.
Start the engine by turning the key in the ignition (one position before starting engine). Selecting and resetting the instrument cluster’s SELECT/RESET knob will show the engine oil life indicator until it is disabled. More than 10 seconds should be spent pressing the SELECT/RESET knob. More than 5 seconds should be spent pressing the SELECT/RESET knob.
Why is my oil light still on after I have changed my oil?
The second most prevalent reason is a lack of oil pressure. Although the last frequent reason of a lit oil light, even after an oil change, is the most serious, it is also the most difficult to diagnose. It is possible that the oil pump is not circulating enough oil to maintain the engine’s components lubricated and running correctly, which might result in a variety of engine problems.
What does it imply when the maintenance needed light illuminates on your vehicle?
The maintenance necessary light informs you that maintenance is required in accordance with the vehicle’s maintenance plan and the distance travelled. Most of the time, this simply indicates that your vehicle’s oil needs to be changed.
What is the best way to reset my phone?
From the Settings menu on your Android phone, you may do a factory reset. Backup & reset may be found in the Settings menu; choose it, then hit Factory data reset and Reset phone. Following that, you’ll be requested to enter your passcode before selecting Erase everything. Choose the option to restart your phone once you’ve completed this step. After that, you’ll be able to recover your phone’s data.
When driving a 2007 Honda Accord, how do you reset the maintenance light?
How to Reset the Oil Life on a Honda Accord from 2007 to 2010 Make that the “ON/II” position on the ignition switch is selected. Continue to press the select/reset knob until the engine oil life indicator appears on the screen. Approximately ten seconds will be required to press and hold the select/reset knob down. Blinking indicates that the engine oil life indicator is nearing its end. Five more seconds may be obtained by pressing and holding the select/reset knob.
What is the best way to reset my oil life?
How to Reset the Oil Light (with Pictures) Following an Oil Change Make all of the car’s systems operational, but turn the engine off. The “Reset” button or stick, which is normally positioned on the dashboard, near the speedometer and fuel gauge, should be found and pressed. Continue to hold the button down until the “Oil” symbol or word begins to flash, or until the indicator lights display some other indication that the system has been reset.
Post Views: 4Spread the love
